Protect America Simon XT Installationshandbuch PDF herunterladen (Seite 8)

Install Line Grabbers and Sensors

5.2 — Install Door & Window Sensors

Place marked sensors in their proper location. Additional sensors may be placed to your liking. When placing sensors, make sure that the arrows on

each side are aligned.

3/8in

magnetsensor

Make sure that the sensor and

magnet are within 3/8" of each

other. Use spacers on metal doors

or to aid proper sensor alignment.

Use the provided self-adhesive

velcro to secure the sensor to the

door or window, and the magnet

to the door or window frame.

Determine an appropriate location

for each sensor.

7.5ft7.5ft

Place the motion detector in

the corner of the room, 7½'

above the ground.

Use the self-adhesive velcro to

secure the motion detector

in a corner.

35 ft

Each motion detector protects

within a 35' range in a 90° arc.

5.3 — Install Motion Detector (If Included)

Motion detectors should be placed in the highest-trafc areas of your home, e.g., a living room or a hallway.

CLICK

5.1 — Install Line Grabbers (Landline users only) —

DO NOT CONNECT A LINE GRABBER TO THE SIMON XT!

Repeat this step for every phone in the home. For additional line grabbers please contact Protect America at 1-800-951-5111, option 2.

Connect a line grabber to

the wall plug.

Disconnect phone from wall.

Connect the phone to

the line grabber.

Make sure to clean the installation location before applying each sensor.

Upon installing, write the location of each sensor on the "Sensor Information

Worksheet" located on the last page of the manual for future reference.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Protect America Simon XT Installationshandbuch Seite 8